If you have a 35mm shop vac connection, and a tool with a 60mm dust port, then it should work well.
Interestingly, DeWalt includes a part like this with their 7491-XE table saw, but of all the parts in their service manual, this has no part number. At no point have I seen this sold separately, (and I've asked around, and looked online). So I made my own so I could connect BOTH my planer and table saw simultaneously.
The 60mm end is tapered down to 57mm (from memory) so it can be inserted into the lower dust port on the table saw, or the non-100mm end on my thickness planer.
The 35mm end is tapered as well to get a solid seal and works well with 35mm vacuum hoses/handles.