Skip to main content

Transstellar Journal Publication & Research Consultancy (TJPRC)

Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC Pvt. Ltd.) is a privately held company, dedicated to the global dissemination of information through an unparalleled commitment to quality, reliability, and innovation. As of today, we are one of the leading national and international journal publishers and distributors of our research journals and serve more than 10 million scientists, research scholars, educational institutions, governmental bodies, corporate, sc...


rss RSS

7,255
RESULTS


Show sorted alphabetically

Show sorted alphabetically

SHOW DETAILS
up-solid down-solid
eye
Title
Date Published
Creator
Meloidogyne incognita was studied on damping off (Pythium aphenidermatum) and root rot (Rhizoctonia solani) diseases of tomato (Lycopersicon esculentum, Mill.) under greenhouse conditions. A total of seven treatments, replicated four times were taken up in RBD and the parameters were observed viz. germination percent of tomato at seventh, fourteenth and twenty one days after sowing the seeds, the numbers of galls per root system, root weight, shoot weight, root length and shoot length were...
Topics: Meloidogyne incognita, Rhizoctonia solani, Pythium aphanidermatum, Tomato Plant
This paper deals with the development and testing of a pedal operated finger millet thresher. The prevalent millet threshing method like beating with sticks, rubbing and trampling finger-heads under bullock’s feet or men feet are tedious and labour and time consuming. Pedaling is the most efficient way of utilizing power from human muscles. Keeping this thing in mind pedal operated thresher for minor millets with spike-tooth type threshing cylinder was developed and tested. The physical...
Topics: Pedal Operated Millet Thresher, Traditional Method of Threshing, Human Energy Expenditure
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 174

favorite 0

comment 0

In this paper, we have applied a new Chebyshev wavelet based coupled method to film-pore diffusion model. We have used the film-pore diffusion model, satisfactorily describe kinetics of methylene blue adsorption onto the three low-cost adsorbents, Gauva, teak and gulmohar plant leaf powders. We first discretize the nonlinear PDE and then utilized the Chebyshev wavelets on the obtained discretize nonlinear differential, equation to get the solution at each approximation of Picard method. The...
Topics: Methylene blue, Adsorption Kinetics, Film-Pore Diffusion Model, Low-Cost Adsorbents, Chebyshev...
Transstellar Journal Publication & Research Consultancy (TJPRC)
by Transstellar Journals
texts

eye 71

favorite 0

comment 0

Social media is a vastly developing technology in the system environment on the internet and this knowledge assistance was useful for many organizations, people or company to make correct decisions about the products, things, and the recently released movie. Opinion mining is used to track the emotions of the public about a specific product and which is one kind of natural language processing or otherwise called as sentiment analysis. But, in case of large reviews about the product, the...
Topics: Part of Speech (PoS), Aspect-Opinion pairs, Divisive Analysis & Nearest Neighbor
Songs in the Indian novels are an occasion to share the sorrows and sufferings of the underprivileged in addition to uniting them. Songs serve as an important medium to record the history of the race and hand over it to the next generation. This paper attempts to analyze these songs, the situations where the song and dance form take place and their role in the development of the Indian novels. It shows how the songs pave way to the subaltern solidarity.
Topics: Song, Underprivileged, Solidarity, Indian Novel, Subaltern
The investigation was undertaken in the Department of Horticulture, College of Agriculture, Dapoli during 2009. The investigation involved completely randomized design with 4 treatments viz, T1- Cel -fresh 0.18% Tablet (1-MCP)-1Tablet/1M3, T2- Cel -fresh 0.18% Tablet (1-MCP)-1Tablet / 2M3 , T3- Cel -fresh 0.18% Tablet (1-MCP)-1Tablet / 3M.3 airtight fumigation chamber (fruits were kept for 6 hours), T4-Control. 1-methylcyclopropene resulted in delaying ripening process by 6 to 7 days which was...
Topics: 1-Methylcyclopropene, Shelf Life, Quality, Alphonso Mango
Mango is known as “King of fruits” and it belongs to the genus Mangifera of the family Anacardiaceae. Mango has become naturalized and adapted throughoutthe tropics and subtropics.Defect of internal break down causes browning or blackening of arils, which gives a typical foul smell if unnoticed. The Mediterranean fruit fly, Ceratitiscapitata (Wiedemann), is one of the world's most destructive fruit pests, these fruit fly insect is commonly find in the mango fruit. These internal defects...
Topics: Soft X-Ray, Mango, Internal Quality Analysis, Image Processing
As of now, several improvements of detecting and measuring the leading vehicle distance have been carried out, unfortunately failed to meet the requirement of intelligent vehicle technologies providing some unsatisfactory results. One of the common and major drawbacks of such methods is inability to detect black color vehicles with precision. As a solution novel approach is presented in this article emphasizing on clustering based segmentation technique. In this method leading vehicle is...
Topics: ITS, Frame Extraction, Segmentation by K-means Clustering, Target Identification
Pseudomonas fluorescens is the most widely used biocontrol agent for crop disease management. Field studies were conducted to evaluate Pseudomonas fluorescens against sheath blight, brown spot and glume discolouration of rice. Different combinations of application methods viz, seed treatment + seedling root dip, seed treatment + soil application, seed treatment + seedling root dip + foliar spray, seed treatment + soil application + foliar spray were evaluated in the field in comparison with...
Topics: Biological Control, Pseudomonas Fluorescens, Sheath Blight, Brown Spot, Glume Discolouration, Rice
In recent times, due to unchecked industrial effluent treatment natural resources like land, air, water and soil are getting polluted. The major cause of this pollution is discharge of pollutants from untreated industrial effluent in to land and water that are containing toxic elements including various heavy metals viz. Cu, Ni, Zn, Mn, Fe, Cr etc. These metals are present as contaminants in the effluents which are released from different industries such as electroplating, mining, pulp industry...
Topics: Industrial Effluent, Heavy Metals, Bioremediation, Biosorption, Dead Fungal Biomass
The study of the Formicidae settlement is realized thanks to the squares technique in the technical institute of fruit arboriculture and vine from which we chose two orchards one is a vineyard, the other one an apricot- tree orchard and a fallow land. These three study environment are situated in Béni-Tamou in the heart of the central Mitidja. Our results have permitted to collect 1112 individuals from which 15 species, 12 kinds and 3 subfamilies. The most abundant species are Tapinoma...
Topics: Formicidae, Central Mitidja, Apricot, Vine, Fallow, Inventory
Internal Combustion Engines can be found under the hoods of 98% of the estimated 1.2 billion cars in the world. The quest for engines with better power and greater fuel efficiency has been persistent for a great number of years. New ideas and technologies have been incorporated into the current system in order to reduce the consumption of fuel. A six-stroke I. C. engine will radically improve on the concept of a four-stroke I. C. Engine. It will increase the fuel efficiency and improve the heat...
Topics: Efficiency, Engine-Head, Injection, Six-Stroke, Water
The purpose of the study is to investigate and analyses the impacts of inadequate infrastructures provision on real property value in Agbama and Ehimiri Housing Estate located in Umuahia City of Nigeria. Both open and closed ended questionnaire was designed with multiple choice test questionnaire survey because of its flexibility and simplicity benefits in data interpretation. A total of 400 (Nr) questionnaires were administered to households and landlords of the housing estates, and of these...
Topics: Housing Estate, Inadequate, Infrastructure, Real Property, Value
Each utterance is exuberant. It says less than what it intends and means more than what it explicates explicitly. The act of translation is not merely rendition from one language to the other but its challenge lies in uncovering the beliefs, thought processes, intentions and silences in utterances of the speakers/listeners and writers/readers. These frames are influenced by socio political, geographical, cultural and ideological structures of a society. Mary Louis’s term “contact zone”...
Topics: Not Merely Rendition, Influenced by Socio Political, Geographical, Cultural and Ideological...
Mahesh Dattani is one of the most famous modern Indian – English playwrights. He always deals with the complicated dynamics of the modern urban family. In many of his plays, he deals with various issues like homo sexuality, gender discrimination, communalism and child sexual abuse. Dattani is one of the play wrights who challenged the construction of India and Indian as they have been presented in the modern English theatre. This paper is a modest attempt to study the gender-based injustice...
Topics: Gender-Based Injustice, Dattani, Homo Sexuality, Gender Discrimination, Communalism and Child...
The purpose of the study is to identify factors which are evaluated formally for the analysis of economic units (EUs) as the basis for determining strategies for its development. During the study the model is used as an official to diagnose the current state of the reference units is defined. The investigation includes a comparison of some national and international studies, which show the similarities and differences on the subject treated. This research has identified that the Ministry of...
Topics: Evaluation Factors, Economic Units, Profile of Enterprise, Enterprise Characteristics
In the present investigation Numerical Simulation of Analysis of Buckling of Stiffened Circular Plates Subjected to In-Plane Loading has been done. Circular plate of radius of 0.5m and thickness of 0.005m of the plate is held constant for all the cases that are studied. The boundary conditions considered are such that the plate is fixed and released in radial direction. Stiffened circular plates subjected to the above loads and boundary conditions are numerically simulated using ABAQUS 6.10...
Topics: Buckling Load, ABAQUS6.10, Stiffened Plate, Circular Plate
A study was carried to develop model equations for assessing impact of ore materials and ore loading in the development and recovery of heat in the peripheral zone of the blast furnace. Mathematical models (using essential regression excel package) was developed to help facilitate data analysis. The results from data of the particle size distribution of the agglomerates table revealed that within agglomerates fractions content of -5mm and +40mm not more than 5% each, and content of fractions...
Topics: Blasts Furnace, Peripheral Zone, Ore Load, Indirect Reduction, Degree of Use of CO, Heat Transfer
In present theory and practice of design of circular columns the main steel is provided along the longitudinal (vertical) direction of the column. But the replacement of this form of main reinforcement in to the cross spiral/helical form will lead to increase in its load carrying capacity by enhancing its ductility and earthquake performance.
Topics: Column, Cross Spiral Reinforcement, Helical Reinforcement, Ductility, Earthquake Performance
We discuss here Strongly Multiplicative labeling of some path related graphs. We prove that the Total Graph and Splitting Graph of the path Pn are strongly multiplicative. In addition to this we prove that Shadow Graph of the path and Triangular Snakes are strongly multiplicative.
Topics: Strongly Multiplicative Labeling, Total Graph, Splitting Graph, Shadow Graph 2010 Mathematics...
A pot experiment was conducted in the polyhouse of forestry to show the effect of compost and Pseudomonas fluorescens alone and in combination on growth of Lycopersicon esculentum. The growth parameters selected for study were Plant height, Root length, Number of leaves per plant, Number of fruits per plant and Weight of fruit.                           The results obtained during the course of investigation were further analyzed statistically. Effect of different treatment of...
Topics: Bio-Fertilizer, Compost, PGPR, Pseudomonas Fluorescens, Tomato
In this paper presents literature survey for the implementation multilevel inverter in Mumbai Local Trains. Also present latest inverter system implemented in the local trains. This will also give the information about the Total Harmonic Distortion in the traction system. Initially Total Harmonic Distortion and losses due to that will be considered for the present system inverter and various topologies are studied with their advantages and disadvantages.
Topics: Multilevel Inverter, Total Harmonic Distortion, Electric Traction
Islamic finance is emerging as a rapidly growing part of the financial sector in the Islamic world as it has become a global phenomenon. Moreover, both Islamic and western countries have been embraced it. The mudarabah contract refers to an agreement made between a capital provider and another party who acts as the entrepreneur. Therefore, this paper attempts to analysis the concept of mudarabahin investment deposit. The characteristics of Investment deposit in both banks was briefly explained...
Topics: Mudarabah, Investment, Deposit JEL Classification: G21 _ G28 _ K12 _ K41
Seam puckering is the major issue that causes manufacturing defect in the appearance of clothing. There are various are various fabric used in clothing industry. Seam puckering is more common on woven fabrics than knits; and it is prominent on tightly woven fabrics. Therefore, in the present research, different fabrics like cotton, silk, chiffon, georgette were chosen along with a three-ply polyester filament sewing thread. Samples were sewn using 2 layers of fabric on single needle lock stitch...
Topics: Seam, Stitch, Puckering, Quality, Tension
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 54

favorite 0

comment 0

In this paper, a “Proportional-Integral-Derivative” (PID) controller used in a aircraft pitch control system is optimally tuned to control the output response so as to obtain a much more stable and optimized transient response is studied. The objective is to obtain a cohesive, sturdy and controlled system by tuning the PID controller using PSO algorithm. The obtained result is compared against the results obtained by re-tuning the same system with standard PID tuning algorithm and proves to...
Topics: PID Controller, PSO Algorithm, Aircraft Pitch Control System & Mat Lab Auto Tuning
Transstellar Journal Publication & Research Consultancy (TJPRC)
by Transsttellar Journal
texts

eye 125

favorite 0

comment 0

Now a day for industrial applications and automotive industries, many are utilizing advanced welding technique is Friction stir welding process, offering more advantages are quality of the weld is good, consumption power is low so this process is taken for research work. This paper investigates mechanical properties of input parameters of welding speed, rotational speed, tilt angle, axial force and output parameters are tensile strength, micro hardnesson dissimilar welding of aluminium alloys...
Topics: Industrial Applications, Friction Stir Welding, Aluminum Alloys & Microstructural Investigations
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 314

favorite 0

comment 0

Super alloys are extensively used in the field of aerospace to manufacture aircraft engine components such as casings, rings, seals, fasteners, turbine blades, vanes, discs, shafts, combustors and general engine hardware. Drilling is a very important process that is mainly used to make a hole in the aircraft engine components. The quality of the drilled whole characteristics is of prime importance in the development of aero-engine components. This study reviews the machiniability of drilling of...
Topics: Super Alloys, Drilling, Dry Drilling, MQL Drilling, Nano Environment, Drilling, Tool Wear, Force...
The present study was carried out to examine the spatial and temporal variability trends in precipitation at annual and seasonal basis for the 24 districts of Karnataka state, India. Statistical trend analysis techniques, namely the Mann–Kendall test and Theil - Sen slope estimator test were used to examine trends in both parameters at the 5% level of significance (LOS). Data analysis showed that there was notrend in all seasons as well as annual mean for precipitation and mean temperature at...
Topics: Mann-Kendall Test, Precipitation, Climate Change
Vijay Tendulkar as a naturalistic and realistic playwright revolutionizes Indian English Theatre with his raw themes and real life characters. He acquired an epithet ‘The Angry Young Man’ of Marathi Theatre’. His protagonists, especially females struggle a lot against hostile family and the society and experience secret physical, emotional and psychological wounds and scars. Mahesh Dattani is considered as a ‘Change Element’ as he opens up new horizons in Indian English Theatre. He is...
Topics: Patriarchy, Disintegrated Families, Betrayal, Incest, Child Sex Abuse, Trauma & Moral crisis
R. K. Narayan narrows down his fictional world to a Southern place, which was then a small-village-like town but now grown to a big city, Malgudi. The town now stands midway- on the one hand with numerous contradictory old and superstitious beliefs and culture, and on the other hand, with glamour and attraction of the modern beliefs and living standards. The present article deals with the issues of modernity and marginality, the ever –going conflict between the old and the new, the ancient...
Topics: Ancient, Modern, Malgudi, Hinduism. Christianity, Muslim Religion, Orthodoxy
Man needs language as a tool to identify himself as a part of a social group and as a tool of survival in the world. Every language has its flavors rendered to it by the culture that creates and nurtures it. It, therefore, becomes important for the user of a language to be equally acquainted with the culture and civilization of the society from where the language originates. Taking this into account, a language instructor can never dispense with the socio-cultural inputs to reinforce the...
Topics: Culture, Foreign Language, Language Teaching, Multilingualism, Multiculturalism, Demographics,...
Rice (Oryza sativa) is one of the most important staple food crops in many Asian countries. The demand for rice growing, while the cost of irrigation is rapidly increasing, and adequate area to grow rice is unavailable Therefore, India is facing a major challenge to increase rice production, the main food grain. A minimum of 258 and a maximum of 395 numbers of grains per panicle were observed in the direct sown field, and a minimum of 227 and a maximum of 351 numbers of grains per panicle were...
Topics: Direct Sowing, Seed Drill, Tillers, Panicle Length, Yield, and Benefit Cost Ratio
Emotional Intelligence is the key to understanding the behaviour of self and every other individual. Communication Skills with application of Emotional Intelligence strengthens inter-personal relationships.
Topics: Emotional Intelligence, Communication Skills, Understanding, Self, Others, Leaders, Managers
Transstellar Journal Publication & Research Consultancy (TJPRC)
by transstellar journal
texts

eye 26

favorite 0

comment 0

In Biogas extraction from waste orange peel by digestion process the disposal methods define the fresh peels of orange for the citrus processing industry has become a major concern. Orange peels are the major solid by-product and the dried orange peels have content of protein, pectin, cellulose, and hemicellulose, those can be converted into a valuable product like methane gas by anaerobic digestion process. Our main objective is to thoroughly inspect the prospect of handling and transformation...
Topics: Hemicelluloses, Orange Peels & Biogas
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 176

favorite 0

comment 0

The problems associated with distribution system in terms of delivery of clean power and their solutions are investigated through this paper. Power quality has become a major issue in the present power system network. The network is mostly inductive in nature so it draws more reactive power. This causes harmonics and voltage flickering. To maintain the proper operation of interconnected power system, we use one of the facts devices such as fuzzy controlled D-Statcom which provides suitable...
Topics: Distribution Static Compensator (D-Statcom), Hysteresis Controller, Fuzzy Logic, PI Controller,...
The present study was carried out in Darjeeling, India during 2013 to 2014. Field survey was conducted for collecting information regarding utilization aspects of some underutilise fruits. Important wild fruits were selected on the basis of their easy availability and on their food, medicinal and other values in Darjeeling regions. Morphological descriptions were given after consulting with botany experts and information gathered from various literatures. The most common and popular value added...
Topics: Wild Fruits, Morphological, Utilization, Quality
The study made use of IT’s among accountants in Ekiti state, determines how often Accountants used IT’s for their information needs and to ascertain the extent to which they were satisfied with the services provided by IT’s. The analyses were based on data from a questionnaire survey of the professional accountants in Ekiti state. The findings revealed that due to lack of awareness, majority of the accountants were yet to take advantage of the huge potential benefits that can be derived...
Topics: Computer, Mobile Phone, Email, Television Set, Video Calling, Tape Recorder, Fax Machine Internet...
Transstellar Journal Publication & Research Consultancy (TJPRC)
by transstellar journal
texts

eye 12

favorite 0

comment 0

An algorithm to find out the optimum configuration from a list of possible options are carried out in this paper. An equation relating input force applied and output obtaining are found out for each configuration by the help of static force analysis. Friction and dynamics characterize are not considered since they do not affect on grasping force or effect equally on different configurations. Genetic algorithm which is a tool in MATLAB is used to find the best possible values for each link. By...
Topics: Robotics, End Effectors, Gripper, Optimization, Genetic Algorithm & MATLAB
In Algeria, the Saharan agriculture has experienced a wide and deep transformation through the different agricultural policies of the State. The balance sheet of the current management of agricultural resources exploitable, reported their poor condition. The potential agro-pedological and socio-economic, show that these resources have a great potential for the revival of the old oasis and the creation of large agricultural poles up, ensure the self-sufficiency at the regional scale. The present...
Topics: Agriculture, Sustainable Development, System of Production, Sahara, Algeria
UART (Universal Asynchronous Receiver Transmitter) is a serial communication protocol; mostly used for long-distance, high speed, low-cost data exchange between computer and peripherals. During the actual industrial production, sometimes we do not need the full functionality of UART, but simply integrate its core part. UART includes three basic modules which are the baud rate generator, receiver and transmitter. The UART implemented with VHDL language can be integrated into the FPGA (Field...
Topics: UART, VHDL, VLSI, FPGA
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 20

favorite 0

comment 0

The CART distance based algorithm with the classification tree paradigm based on the C45 algorithm. The CART algorithm is used as a preprocessing algorithm in order to obtain a modified training database for the posterior learning of the classification tree structure. Then the incorrectly classified instances are duplicated with the previous data set and finally C45 is applied to complete the classification procedure of biomedical data.
Topic: The Hierarchal Model of Decisions . Data Mining is a Technology that Draws Out Information from...
Our theory encompasses the wave-like and mass-like nature of radiation. The term coherence stands for the light which is capable of interference and in order to yield many interfering fringes, it must be assumed as very monochromatic. The Coherence length is the extent in space over which the wave is nicely sinusoidal so that it’s phase can be predicted reliably. In this approach we have introduced a quantity called Dual frequency which arises due to the aforesaid dual nature of radiation....
Topics: Description of Light, Mass Concept, Uncertainty Relation, Dual Frequency, Stability
Every physical move we make is triggered by neural processes in the brain. With the right equipment and recent developments in both brain imaging technologies and cognitive neuroscience, it is possible to read and record these processes. This has led to the rapidly growing field of brain computer interfaces (BCI). The Brain Computer Interface (BCI) helps unblessed people to make use of the devices and applications through their mental activities. So people believe that BCI technology is a...
Topics: BCI, EEG, FFT, Lab VIEW –Laboratory Virtual Instrument, Microcontroller
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC journals
texts

eye 68

favorite 0

comment 0

Browning political poetry, adopting content literary analysis, to scrutinize and trace the major elements of reformation portrayed in her poems. Elizabeth Barrett Browning was born in 1806, considered as one of the most reputed and prolific female poet of the Victorian era. Through her poems, she established herself as not intimidated woman, who expresses her views on contemporary socio-political issues as a tool of protest on the ongoing political milieu. Consequently, she wrote on issues such...
Topics: Social Reform, Child Work, Slavery, Infanticide, Women Rights & Reform Act
In this paper, the study and analysis of failure mechanism of non-articular prosthetic foot (SACH) in the region (Bolt Adapter), the tests of mechanical properties and fatigue behavior were carried for material from which the bolt is manufactured, a region where the failure occurs and also analysis of the gait cycle and GRF of amputee subject and Compare it with normal subject and inserted of these properties to the program of engineering analysis (Ansys) to calculate the safety factor of...
Topics: Analysis, Prosthetic, Foot, SACH, Fatigue, Bolt, Adapter
In this paper, the study and analysis of failure mechanism of non-articular prosthetic foot (SACH) in the region (Bolt Adapter), the tests of mechanical properties and fatigue behavior were carried for material from which the bolt is manufactured, a region where the failure occurs and also analysis of the gait cycle and GRF of amputee subject and Compare it with normal subject and inserted of these properties to the program of engineering analysis (Ansys) to calculate the safety factor of...
Topics: Analysis, Prosthetic, Foot, SACH, Fatigue, Bolt, Adapter
The role of women in Banyumaspolitics is an interesting object to be studied, especially if it is related to Banyumas culture. As the transition culture between Javanese and Sundanese culture, Banyumas culture have egalitarian values. It has relatively loose social structure compared to Javanese and Sundanese social stucture. Thus, the position of women in Banyumas traditional societyis quite unique. While it still reflects the values of patriarchy, there is space for women to play important...
Topics: Banyumas Culture, local Politics, Egalitarian Values, Women
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 39

favorite 0

comment 0

Mechatronics is an area denoting the combination of technologies, which go together to produce industrial robots. Mechatronics are defined as “the integration of Mechanics, Mechanical Engineering, Electronics, Computer technology, and IT to produce or enhance products and systems”. Mechatronic clearly brings out the novel possibilities of combining different disciplines and the potential for machine intelligence. A typical mechatronic system picks up signals from the environment, processes...
Topics: Mechanics, Mechanical Engineering, Electronics, Computer technology, and IT
In the recent years the development in communication systems requires the development of low cost, minimal weight, low profile antennas that are capable of maintaining high performance over a wide spectrum of frequencies. This technological trend has focused much effort into the design of a micro strip patch antennas. The popularity of micro strip antennas are increasing day by day because of ease of analysis and fabrication, and their attractive radiation characteristics. So the micro strip...
Topics: Microstrip Circular Patch Antenna, Genetic Algorithms, Linear Array Antenna, Dolph-Chebyshev Array,...
In this paper, a demonstration of the performance estimation of OFDM-Wimax access network is carried out at varied values of subcarriers for uplink and downlink packet propagation and is followed by a comparison of performance of the reported OFDM-Wimax network. High performance of OFDM based Wimax network with acceptable SNR and BER is achieved by mitigating the fading problem of wireless network.
Topics: Wimax, OFDM, QoS
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 45

favorite 0

comment 0

A piston check valve comes under a Check Valve category, which normally allows fluid to flow through it in only one direction. Piston check valves are generally used to protect pumps or similar equipment, allowing the flow in only one direction and preventing flow reversal due to back pressure. The piston check valves are designed with globe valve bodies, producing an increased drop pressure in the pipeline. This design provides a tight seal as well as a fast reaction to the closure impulse. In...
Topics: Piston Check Valve, CFD, Pressure Drop & Flow Coefficient (CV)
Global social frontiers are becoming more porous and enterprises are evolving their competitive strategies to align with socialstrata. Research relentlessly kindles enterprises’ human resourcesas sustainable value to enhance competitive advantage. The engine of this value is competencies owned and demonstrated by talent. Across the world, a growing number of organisations haverecognised the importance of defining employee social competencies to derive talent competitiveness. Few others are...
Topics: Social Activism, Networking Behavior, Professional-Socio-Networking, Competency Framework and...
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 39

favorite 0

comment 0

Post harvest losses of fruits and vegetables are a serious problem, because of the rapid deterioration during handling, transport and storage in tropical regions. Cucumbers were treated with Calcium Chloride, Sodium Chloride and Lime juice, with different steeping time. The effects of these chemicals and natural agents on pre-treated cucumbers were evaluated, by analyzing the pH, TSS, Weight loss and Shelf life. The results indicated that, due to pre-treatment increase in pH, TSS and Weight...
Topics: pH, TSS, Calcium Chloride, Sodium Chloride & Lime juice.
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 26

favorite 0

comment 0

In present days, researchers deal with a problem to identify the isomorphism in structural synthesis among the kinematic chains (KC). In recent times, a new method was proposed named as Link adjacency values. In this method, two new values for each link, named as first adjacency link value (FALV) and second adjacency link value (SALV). These values detect the isomorphism among the kinematic chains of a mechanism. Another two invariants, maximum first adjacency link value and maximum second...
Topics: Kinematic Chains (KC), First Adjacency Link Value (FALV) and Second Adjacency Link Value (SALV)
The extraction of feature plays an important role in economical machining. The main object of this paper the extraction of feature by using NX CAD/CAM.NX software provides complete computer-aided manufacturing (CAM) solutions from  machine tool programming to post processing and machining simulation. NX CAM’s advanced functions in each of its modules can maximize returns on investments.In the latest machine tool technology, adopted across by many manufacturing industries. NX delivers proven...
Topics: Volume-Based 2.5-Axis Milling, Computer-Aided Manufacturing
Brake fading and thermo-elastic deformation of brake rotor is frequently found problem in custom made rotors. During braking phase, kinetic energy of vehicle is converted into mechanical energy. These high frictional forces lead to higher frictional heat being developed. This heat increases the rotor temperature. Due to combined effect of mechanical forces and temperature rise, the rotor deforms. This problem is very severe in All Terrain Vehicles (ATVs). To avoid this problem,...
Topics: Brake System Design, FEA, CFD, Temperature Rise, Brake Rotor, ANSYS 14.0, Optimization
The aim of this paper is about the study done for the selection of aircraft on the basis of gears i.e. to enable the aircraft to manoeuvre on ground and the methods applied for finding out stresses in slabs. For the purpose wheels are required over which the aircraft may run and carry the entire weight of the aircraft. The major portion of total loads carried by two main gears which are provided in the fuels age or in the wings near the junction of fuels age and wings. Therefore, the third...
Topics: Rigid Pavement, Gears, Portland Cement Association (PCA), Corps Engineer’s Method,...
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 62

favorite 0

comment 0

Hydroponics is a method of agriculture using mineral nutrient solutions, in water, without the use of soil. Soil-based plants can be grown either with their roots in the mineral nutrient solution or in perlite or gravel, which is an inert medium. There are various advantages to using hydroponics over traditional crop-growing methods. The advantages include expedited plant growth, control of nutritional values, easy correction of deficiencies; growing environment can be controlled – including...
Topics: Kratky’s Method, Spinacia Oleracea, Nutrient, Non-Circulating System, Nutrient Estimation &...
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 45

favorite 0

comment 0

Dissimilar metals welding can be used where, combination of properties light weight and high strength was interested. Aluminium and Copper and its alloys are light metals have special properties, such as high electrical and thermal conductivities with excellent corrosion resistance. They can be used with combination in aerospace and automobiles industries. To join these dissimilar metals, a solid state friction welding is preferred over a conventional fusion welding, because of their typical...
Topics: Friction Stir Welding, Dissimilar Metals, Multi Objective, Taguchi Method & ANOVA
This study aimed to analyze the family environment and its influence on early childhood development in South Tangerang City. This study used a cross-sectional study design. Family environment data measured using the Family Environment Scale (FES) and early childhood development is measured using indicators of curriculum in 2010, including measurement of the four aspects of early childhood development, i.e. religious values, physical motor, cognitive, and social emotional. The data includes the...
Topics: Family, Gender, Development, Influences
The incidence of whitefly remained low throughout season during summer, 2015. The population aphid showed highly significant negative association with Bright Sunshine Hours (BSS) (r = -0.72**). The higher activity of mite was recorded during 4th week of May. Temperature (minimum, MinT and maximum, MaxT), BSS and Wind Speed (WS) were the important abiotic factors affected the fluctuation of mite population. The activity of Earias vittella Fab. as fruit borer was highly correlated with BSS...
Topics: Aphid, Whitefly, Mite, E. vittella, Spiders, Leafhopper
Breast cancer in females is the most common cancer diseases and leading cause of death. In the recent years, Computer Aided Diagnosis (CAD) is very useful for detection of breast cancer. Mammography can be used as an efficient tool for breast cancer diagnosis. A computer based diagnosis and classification system can reduce unnecessary biopsy. This paper presents the tumor detection algorithm from mammogram, this study shows the outcome of applying image processing morphological operation on...
Topics: Region of Interest, Difference of Gaussian, Gaussian, Center Symmetric Local Binary Pattern, SVM...
With a large share of India’s population opting to shop at supermarkets, the contours of supermarket shoppers are said to be getting more and more complex by each passing day. In the midst of this dilemma, this paper attempts to study the characteristics of supermarket shoppers in India across different regions through a descriptive approach. In this study an all India level survey of 1111 supermarket shoppers has been initiated in analyzing the characteristic features of supermarket shoppers...
Topics: Retailing, Supermarkets, Supermarket Shoppers, India
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 27

favorite 0

comment 0

In recent years, research works are done mostly in the field of Semi-Active Control systems, like Magneto Rheological dampers to reduce the effect of seismic vibrations in the structures. In this paper, researchers working in optimal design of MR dampers using various developed control Algorithms, propose the most efficient model of MR fluid, done by comparing various primary design parameters, and the variation of each parameter with respect to the other has been studied in detail. Optimal...
Topics: Magneto-Rheological Damper (MR), ANSYS Parametric Design Language (APDL),...
The report consists of the summary, keywords, introduction, contains 7 pages of the typewritten text, 4 figures, includes the 4names of the used literature.
Topics: Route of Transportations, Goods Turnover, Transport Network, Model of Transportations, Licensing,...
Peaches are well known for higher content of carotenoids (provitamin A), and phenolic compounds. Experiments were conducted to evaluate the nutrient content of peach juice and powder made from the residue and it was found to be 82.23 per cent and 17.066 per cent moisture in juice and powder, the ash content was found 1.65 per cent and 2.07 per cent respectively, crude protein was 1.87 per cent and 1.184 per cent respectively, per cent ether extract was found to be 0.183 per cent and crude fiber...
Topics: Peach, Juice, Pomace, Pomace Powder, Nutritive Value, Sensory Evaluation
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 37

favorite 0

comment 0

Kyphosis and Lordosis are the outward and inward curvatures of thoracic and lumbar regions of the human spine. Symptoms may include back pain, muscle fatigue, and stiffness in the back; may increase the risk of disk degeneration and injury to spinal ligaments which would affect the basic activities of daily living. In this study, 30 women were selected comprising of ten kitchen workers, 20 VDT workers inclusive of teachers and students who were above 20 years of age and using desktops and...
Topics: kyposis and lordosis, workers, weight & BMI
In this paper we introduce the design and implementation of two parallel algorithms for solving the general tridiagonal linear system of equations using two new parallel algorithms: Parallel splitting Gauss – Jordan and the general parallel splitting Gauss Jordan algorithms. These algorithms are very easily distributed over different number of processors. In addition our implementations are very efficient, generally a linear speed-up is obtained by increasing the number of processors
Topics: Parallel Algorithms, Numerical Analysis, Tridiagonal Linear System of Equations, Gauss Jordan...
The Effect of different etching current densities on the formation of antireflection porous silicon coating used for Solar Cells industry has been investigated. The results show that both the initial surface morphologies and the anodizing etching condition affected on photoluminescence (PL) and the reflectance of the resulting surface. Large number of pores uniformly distributed on overall surface with average pore diameter from 5.80 to 6.20 nm was observed.   The vertices of the straight...
Topics: The Effect of different etching current densities on the formation of antireflection porous silicon...
Transstellar Journal Publication & Research Consultancy (TJPRC)
by TJPRC Journals
texts

eye 30

favorite 0

comment 0

Friction stir welding is a comparatively quiet new solid state metal joining process developed by the Welding Institute in 1991 and is used for joining of aluminum alloys and dissimilar materials which were difficult to using conventional welding. Objective of this work is to produce sound weld of dissimilar aluminum alloy of AA7075 and AA6101 by using FSW process with two different tool pin profile and investigate the mechanical and metallurgical properties such as tensile Strength, impact...
Topics: Friction Stir Welding, Dissimilar Aluminum Alloys, Mechanical Properties, Process Parameters &...
Transstellar Journal Publication & Research Consultancy (TJPRC)
by Transtellar Journal
texts

eye 14

favorite 0

comment 0

In the present work, Response Surface Methodology is used to investigate the effect of four input variables, namely: type of workpiece (WP), pulse energy (PE), pulse duration (Ton), welding speed (WS) and on the ultimate tensile strength (UTS) in YAG laser welding process. To study the proposed second-order polynomial model for UTS, a Central Composite Design is used for estimating the model coefficients of the four input factors on UTS. Experiments were conducted on Cp- Ti alloy with...
Topics: Pulsed Nd- YAG Laser Welding, Ti, Ti-6Al-7Nb Alloy, UTS, MODELLING & RSM
In this review, mechanical properties such as wear resistance, hardness, scratch resistance of electrocodeposited Nickel with micro and nano SiC on Aluminium 7075 are discussed. Electro codeposition of MMC coating have been influenced by many factors viz., current density, voltage, percentage of particle concentration, addition of surfactant and bath composition are also conferred. Elaborate review has been dispensed on these factors to find the optimum parameters. The state of art has been...
Topics: Electro-Codeposition, Nano and Micro SiC, Tribology, Aluminium 7075
Transstellar Journal Publication & Research Consultancy (TJPRC)
by Transtellar Jounal
texts

eye 13

favorite 0

comment 0

Reinforced concrete building comprises many ducts and channels for sanitary purposes and in order for the accommodation of vital services such as for air ventilation, electricity, internet, and computer networks. Hence, these services may rarely obligate openings of structural components of a building (Beam/deep beam, slab, column, etc.). In this study, the effect of various opening shapes with varying locations on the performance of reinforced concrete deep beam was studied. A finite element...
Topics: Reinforced Concrete Deep Beam, Abaqus CAE, C3D6, T3D2 & Finite Element Analysis
Transstellar Journal Publication & Research Consultancy (TJPRC)
by transstellar journal
texts

eye 66

favorite 0

comment 0

The foremost intent of the study was to determine how accreditation has influenced the state colleges and universities of the Cordillera Administrative Region in their educational management. There were six participating institutions—Abra State Institute of Science and Technology (ASIST), Apayao State College (ASC), Benguet State University (BSU), Ifugao State University (IFSU), Kalinga State College (KASC), and Mt. Province State Polytechnic College (MPSPC) - with Bachelor of Elementary...
Topics: Accreditation, Educational Management, Innovation, Quality Assurance & Higher Education
This study investigates the structural behavior of indirectly loaded deep reinforced concrete (RC) T-beams. A total of 21deep RC T-beams were divided into three groups according tothe ratio of shear span to effective depth. Beams without web reinforcement were tested under indirect point loading applied via central intersecting members until shear failure. Experimental results indicate that indirectly loaded deep beams can carry additional load after diagonal cracking is initiated. The...
Topics: Deep T-Beams, Indirect loading, Shear Span-To-Effective Depth Ratio